- Home
- /
- News
- /
- Industry News
What Is an Inverter Duty Motor?
- 24/11/2020 10:09:00 AM
- Viewed: 11514
- Feedback: 0
Inverters were originally sold to be used with standard motors, but an increasing failure rate for inverter-fed motors led to the introduction of motors for inverter duty. These motors have a higher quality insulation and can withstand the voltage spikes generated by inverters.
Avoid over-specifying inverter-duty motors
- 23/11/2020 02:05:00 PM
- Viewed: 9648
- Feedback: 0
When combining a motor and inverter, the application should tell you what type of motor fits best. If you follow these guidelines, you can avoid more than is necessary.
DC gearmotor or AC gearmotor: What Are the Gains?
- 21/11/2020 02:27:00 PM
- Viewed: 10508
- Feedback: 0
A DC or AC gearmotor can either have in-line or right-angle gearing configuration. In-line modifications have lower backlash, thus providing more efficient speed-to-torque conversion and enhanced positioning accuracy.
Rotary Motors for Precision Positioning – What to Choose When?
- 20/11/2020 02:11:00 PM
- Viewed: 9606
- Feedback: 0
Over the years, electric motors have been continuously improved, driving the industrial revolution. The largest market segment for electric motors is in industrial and domestic mechanical power generation, driving machinery, and auxiliary equipment such as pumps and fans etc.
Understanding The Various Types Of Geared Motors And Their Applications
- 19/11/2020 02:31:00 PM
- Viewed: 9870
- Feedback: 0
Gearmotors are electric motors that use a sort of gear system on the motor’s output. This gearing configuration is known as a gear reducer or gearbox.
Top Benefits of Using Geared Motors
- 18/11/2020 09:29:00 AM
- Viewed: 10078
- Feedback: 0
Geared motors are the future of mechanical development. They are made up of a gearbox that is directly attached to the motor. This eliminates the need for a motor adapter and hookup since the motor pinion meshes straight with the high-speed gear in the gearbox.
5 Layout Ideas For Gear Motor Applications
- 17/11/2020 02:27:00 PM
- Viewed: 10203
- Feedback: 0
It is necessary to go into greater detail when choosing the best gear motor for an application than simply selecting the best fitting output speed and torque.
The Differences Between Spur And Planetary Gear Motors
- 16/11/2020 03:15:00 PM
- Viewed: 9681
- Feedback: 0
The two most popular types of gear motors for industrial use are planetary gear motors and spur gear motors. Choosing the right type of motor is vital to ensure optimum performance in your application.
Stepper Motors in Precision Motion Control and Positioning
- 14/11/2020 01:13:00 PM
- Viewed: 9872
- Feedback: 0
Brushless servo motors promote an extended service life for components in precision positioning.
Gear Motors in Precision Motion Applications
- 13/11/2020 03:03:00 PM
- Viewed: 10095
- Feedback: 0
Gear motors in precision positioning applications are used to provide higher torques and higher resolutions in a compact package and at reduced power requirements.
What is linear motion design engineering?
- 12/11/2020 03:38:00 PM
- Viewed: 9553
- Feedback: 0
Linear motion is an area of motion control encompassing several technologies including linear motors, linear actuators, and linear rolling guides and bearings, among others.
How to select and specify stepper motors
- 11/11/2020 03:36:00 PM
- Viewed: 9707
- Feedback: 0
Stepper motors are a good choice for many motion control applications, if they’re selected properly. Here’s a quick review of some key tips for making the right choice.
What is pole count and why does it matter?
- 10/11/2020 03:35:00 PM
- Viewed: 9666
- Feedback: 0
Simply defined, a pole is a north or south magnetic field of force that is generated by a permanent magnet or current passing through a coil of wire.
What are gearmotors and what do they do?
- 09/11/2020 03:33:00 PM
- Viewed: 9863
- Feedback: 0
A gearmotor is a single component that integrates a gear reducer with either an ac or dc electric motor. Thanks to its gearset, a gearmotor can deliver high torque at low horsepower or low speed.
How to Select a Gearmotor in Four Simple Steps
- 07/11/2020 03:26:00 PM
- Viewed: 9506
- Feedback: 0
Consider key design parameters when selecting a gearmotor for a motion control application.
How to calculate required input power for a gearmotor
- 06/11/2020 10:45:00 AM
- Viewed: 9497
- Feedback: 0
The first place to start when sizing a gearmotor is to determine the required output torque and speed.
Difference Between AC and DC Motor
- 05/11/2020 02:39:00 PM
- Viewed: 9706
- Feedback: 0
Electric motors are usually used to convert electrical energy to mechanical energy. The AC and DC motors are two types of electric motors. The concepts of AC and DC motors are popular among science students.
Which types of DC motors can be used as servo motors?
- 04/11/2020 11:34:00 AM
- Viewed: 9860
- Feedback: 0
Servo motors are used in applications where precise control of position, speed, or torque is required. But many different types of motors can be considered servo motors.
What are multi-stage gearboxes and when are they used?
- 03/11/2020 10:56:00 AM
- Viewed: 9748
- Feedback: 0
Gearboxes are commonly used in motion control applications to change the output speed and torque from a motor to a driven component.
What are electromagnetic power-off brakes and where are they used?
- 02/11/2020 10:51:00 AM
- Viewed: 9730
- Feedback: 0
Power-off brakes are commonly used in motion control applications for stopping or holding a load (or both), especially on vertical axes or for emergency stop functionality in servo applications.
Other
- What are double- and triple-stack hybrid stepper motors ? (31/10/2020)
- What are different ways to express a gear ratio? (30/10/2020)
- What are the performance benefits of 5-phase stepper motors? (29/10/2020)
- Single-phase, two-phase and three-phase motors: all you need to know (28/10/2020)
- Steps to calculate a gear ratio (26/10/2020)
- Applications and advantages of using gear motors (24/10/2020)
- AC Gear Motors leveraging Torque-Boosting Power (23/10/2020)
- What Are Gear Motors? (22/10/2020)
- Gears and gearmotor trends — more customized designs (21/10/2020)
- How Does A Brushless Electric Motor Work? (20/10/2020)
Join