• Salesman
           +(84)918.26.11.44
  • Chat Viber
  • Salesman
           +(84)987.246.757
  • Chat Viber
  • Salesman
           +(84)941.976.189
  • Chat Viber
  • Salesman
           +(84)949.380.913
  • Chat Viber
  • Salesman
           +(84)923.886.133

4 Helpful Noise Reduction Strategies For Industrial Gearboxes

Monday - 21/09/2020 00:47
It is difficult to avoid noise in an industrial setting, especially if you are using equipment like an industrial gearbox. Prolonged exposure to excessive and constant noise can cause permanent hearing damage, which is why noise levels should not be ignored.
4 Helpful Noise Reduction Strategies For Industrial Gearboxes
Because of the health risks, noise reduction strategies are a critical part of industrial safety and operational plans. Here are some strategies you can use to reduce the noise coming from your industrial gearbox and protect your employees.
 
1. Identify sources of excessive noise
 
Industrial gearboxes are a common source of excessive noise in many facilities. Damaging levels of noise are an indication that one or more of the gearbox components may not be operating or designed properly.
 
gearmotors
 
Keep in mind that many factors could cause excess noise, but gear damage is frequently the cause. If you or your employees begin to notice increased sound levels, you should conduct tests on the gear drive to isolate the source. A professional service company can also help you with this.
 
2. Conduct gearbox repairs
 
Most of the noise generated by industrial gearboxes comes from normal operation. This means you may be limited in what you can do to minimize that noise. However, depending on your gearbox design, there are a few strategies you can implement.
 
Look at the teeth within your gear teeth
 
Gearbox teeth vary from curved to flat in shape. The more smooth the contact of the metal teeth, the less friction-based noise is generated. Some alterations to your gear design can reduce noise levels. Removing a small amount of material near the tip of the gear tooth can help.
 
dolingearmotor

 
You can also crown or shave down the tooth into an oval shape. The goal is to reduce the amount of material that makes contact with the corresponding gear in mesh. However, keep in mind that these alterations can impact the total life cycle of the gears, so make sure they are approved by the manufacturer.
 
Excessive wear on the teeth can result in increased noise levels. If you review both sides of the teeth, the wear should be relatively apparent. If you notice excessive wear, you should contact a gearbox repair specialist to diagnose the problem. These experts can inspect and repair or rebuild your industrial gearbox, or send you replacement parts.
 
3. Try changing environmental factors
 
If you’ve done everything you can to address the possible issues with your industrial gearbox, you can also look into environmental issues to reduce noise.
 
Damping
 
You can install damping devices such as honeycomb sheeting in and around your gear drive. These devices decrease noise by reducing sound vibrations. Decreasing vibrations can also help protect other gearbox components, increasing the lifespan and efficiency of your equipment.
gears

 
Isolation
 
Noise is also created when industrial gearboxes transmit vibrations through the mounting into the structure, essentially vibrating the entire frame. If you install a resilient material between a gearbox and its mount, you can usually reduce the vibrations and overall noise levels.
 
Sound barriers
 
Sound-absorbing panels can be used for higher-frequency noise levels. The panels can be placed around gearboxes to minimize the amount of sound near employees.
 
rvgearmotor
 
Enclosures
 
For extreme situations, you can install an enclosure around the source of the sound. The enclosure should be hard-cased and airtight, with an inner layer made of sound-absorbing material. However, if you use an enclosure, make sure you include ventilation, or you could risk overheating your industrial gearbox or other components.
 
4. Make sure employees are taking proper safety measures
 
Your employees should also take safety precautions when working around loud equipment. Whenever possible, instruct your workers to wear earplugs and other protective gear. Employees should also take regular hearing exams to test the impact of the noise in their environment. Finally, conduct regular tests to ensure that your facility is operating at safe levels.

Total notes of this article: 0 in 0 rating

Click on stars to rate this article

  Reader Comments

Security Code